Arms Inserts

Catalogue index: BC-CIBV2-ABP-SET | Trade index: BC-CIBV2-ABP-SET

BC Arms soft ballistic insert set for the left and right Templar’s Gear upper arm protectors. K2/O2 under PN-V-87000:2011. Protective covers sold separately.
  • Delivery: from €45.16 (UPS Irland)
€223.76 gross / kpl €181.92 net + 23% VAT / kpl

Description

ARCHANGEL PRO SOFT — Upper Arm Ballistic Insert Set K2/O2

ARCHANGEL PRO SOFT is a soft ballistic insert set manufactured in Poland by BC Arms for Templar’s Gear upper arm protectors. The manufacturer declares K2 bullet resistance and O2 fragment resistance under PN-V-87000:2011.

The set contains inserts for the left and right upper arm protectors. Fitted inside the corresponding ballistic pockets, they provide protection for the upper arms within the area covered by the protectors.

Compatibility and installation

The inserts are intended for the corresponding Templar’s Gear CIBV3 / CIBV2MIL upper arm protectors. Compatibility is determined by the shape and dimensions of the protector’s ballistic pocket. Vest size does not replace checking the fit of the insert to the protector.

Fit each insert into its corresponding pocket, following its shape and orientation markings, then close the pocket securely. Attach and adjust the protective covers according to the manufacturer’s instructions.

The product includes a pair of soft ballistic inserts. The upper arm protector covers, vest and remaining ballistic components are sold separately.

Protection

Bullet resistance — K2

The declared protection encompasses the 9 × 19 mm threats specified for K1A and K1B, together with the 7.62 × 25 mm TT threat specified for K2.

Threat classTest ammunitionNominal bullet massTest velocity
K1A9 × 19 mm FMJS8.0 g365 ± 15 m/s
K1B9 × 19 mm FMJS8.0 g400 ± 15 m/s
K27.62 × 25 mm TT FMJS5.5 g420 ± 15 m/s

These FMJS bullets have a lead core, with a steel jacket for K1A/K1B and a bimetal jacket for K2.

Fragment resistance — O2

Class O2 specifies a ballistic limit of 525 ≤ V50 < 600 m/s, determined using a standard steel fragment-simulating projectile weighing 1.10 ± 0.03 g.

V50 is the velocity at which the estimated probability of complete penetration is 50%. It is a test parameter, rather than a guaranteed stopping velocity for every fragment.

Testing

MORATEX report 068/2025U documents testing of the ARCHANGEL PRO ballistic package on dry samples. All six valid K2 impacts with 7.62 × 25 mm TT ammunition were stopped, with recorded backing indentation of 15–18 mm.

The report also covers:

  • S1 blade testing at nominal energies of 24 and 36 J;
  • P1 blade testing at 24 J;
  • spike testing at 24 J.

These tests followed procedure PBB-08/ITB, aligned with the corresponding NIJ 0115.00 Level 1 requirements.

Results apply to the tested samples and stated conditions. The report does not include O2 fragment testing.

The report concerns the tested ballistic package and stated conditions; it does not establish separate testing of this product’s particular insert shape.

Technical specifications

FeatureSpecification
ManufacturerBC Arms, Poland
ComponentUpper arm protector inserts
CompatibilityCorresponding Templar’s Gear CIBV3 / CIBV2MIL upper arm protectors
CoverageLeft and right upper arms, within the protector’s coverage area
IncludedOne pair of inserts — left and right
Declared protectionK2/O2, PN-V-87000:2011
Protective coversSold separately

Comparison with NIJ IIIA and VPAM

NIJ IIIA under NIJ 0101.06 requires testing of new, unworn armour with .357 SIG FMJ FN bullets weighing 8.1 g at 448 ± 9.1 m/s, and .44 Magnum SJHP bullets weighing 15.6 g at 436 ± 9.1 m/s. Both ammunition types are required.

VPAM 2 and 3 use 8 g 9 mm ammunition at 360 ± 10 and 415 ± 10 m/s respectively. VPAM 4 requires .357 Magnum FMJ/CB/SC ammunition weighing 10.2 g at 430 ± 10 m/s, and .44 Magnum FMJ/FN/SC ammunition weighing 15.6 g at 440 ± 10 m/s.

K1A/K1B and VPAM 2/3 involve comparable categories of 9 mm ammunition, but differ in velocity and test requirements. K2 additionally addresses the TT threat, which is absent from the standard NIJ IIIA and VPAM 2–4 test schedules. Conversely, a K2 declaration does not establish compliance with their different Magnum or .357 SIG requirements.

NIJ IIIA and VPAM 4 both include .44 Magnum, but use different bullet constructions. Their other test cartridges also differ: .357 SIG and .357 Magnum are distinct cartridges.

Sample conditioning, shot arrangements and backing indentation criteria differ between the standards. Similar velocities or backing indentation measurements do not establish equivalent protection. For body armour, VPAM BSW 2006 is used together with APR 2006.

O2 is a separate fragment-resistance classification. An NIJ IIIA designation alone does not establish an O2 fragment rating.

The declared classification of this product is K2/O2 under PN-V-87000:2011. This comparison does not constitute a claim of NIJ or VPAM certification.

Features

Features
Trade index:
  • BC-CIBV2-ABP-SET
Producer:
EAN code:
  • 5904433658775
Product Safety (GPSR)
Country of origin:

Customers who bought this item also bought ...